We recommend flushing your BatherBox system at least once a month. With regular maintenance, this process should only take 5-10 minutes.
Follow this routine to flush the system:-
Remove the 4 blue filters and white ceramic weights from each line of tubing.
-
Place the filters, weights and exposed tubing ends in a five-gallon bucket with hot water and a splash of white vinegar.
-
Set the BatherBox to the “clean” setting and select valve #1. Turn on warm water and flush the #1 line for 1-2 minutes, ensuring the dilution dial is fully open.
-
Repeat for valves #2, 3 and 4, until the water runs clear with no soap visible.